Wheel Track Renovator 1 | Fix Wheel Tracks On Farm

The most efficient and effective way of filling your wheel tracks left from tractor’s, sprayers, harvesters and irrigators.

The Grizzly Wheel Track Renovator is seriously impressive with what it can do. Optimal operating speeds of 12 to 15km/h allows you to cover a lot of tracks fast. Easily fill tracks up to 350mm deep in one pass. The secret is in the patented opposing disc gang design with the following rear roller.

The discs capture and throw soil into the track while the roller sets the depth of the discs to the set level. Meaning that you can fill deep tracks and shallow tracks with the same depth setting. Available in single units for irrigator tracks and double units from 1.8m track centres up to 4m centres. The ideal machine for controlled traffic farmers (CTF)

Australian Made

Family owned and operated as well as Australian Designed and built for Aussie farmers and Aussie conditions.

Aussie
Made

Features:

Disc design means the machine can be used in both wet and dry conditions
Twist in/out greaseable bearing with a two year warranty.
Patented Floppy T Bar Scrapers to ensure machine can be used effectively in wet conditions.
Optional harrows for a true fine tuned finish.
Convenient inbuilt toolbox comes with all necessary tools

Wheel Track Renovator Specifications

Model	GTR12
Draught kW (hp) Requirements approx.	90+kW (120+hp)
Recommended Working Speed	20 – 25km/h
Disc Spacing	230mm (9″)
Total Weight kg approx.	2400kg
Wheel Track Widths (centres)	2 – 3.5 Metres (See Options if you have wider wheel tracks)
Depth Control	Self levelling (manual adjust depth wheel with infinate adjustment for set up and as adjustment is required for wear)
Transport Width	4 Metres
Hydraulic Track Width Adjustment	Standard
Match up to Different track Widths	100mm incremental adjustment with 1metre hydraulic travel
Frame	7″ x 7″ x 3/8″ (178mm x 178mm x 9.5mm) RHS
Gang Axles	28.6mm (1 1/8″) Square
Gang Bearings	28.6mm x 80mm Self Aligning Greaseable 2 year warranty
Spool Size	150mm Heavy wall pipe
Draw Bar	Fabricated with hydraulic cylinder to transport on wheels
Draw Bar Tongue Size	32mm thick with a 55mm hole (fits CAT2, CAT3, CAT4 drawbars)
Disc Sizes – Scalloped	4 x 610mm x 6mm (24″ x 1/4″) Discs, with 2 x 560mm x 6mm (22″ x 1/4″) Outer Discs

Wheel Track Renovator Options

Model	GTR12
Wide Toolbar	Remains hydraulicly adjustable by 1metre with 100mm incremental adjustment. Specify on order widest wheel tracks you wish to fill.
Trash Bars	Trash bar fixed position to go between discs
T-Bar Scrapers	Floppy t-Bar Scrapers to go between discs for muddy conditions