Welcome to REBUILD . Creative HTML Template
  • Location
  • Office Timing
    SUN - FRI 8:00 - 22:00
  • Toll Free

    Contact Grizzly 1800 637 250

New to site?


Lost password? (close)

Already have an account?


HomeEquipmentTiny XL390 | Improve Soils And Help Non Wetting Farms
Home Tiny XL390 | Improve Soils And Help Non Wetting Farms
Tiny XL390 | Improve Soils And Help Non Wetting Farms

Tiny XL390 | Improve Soils And Help Non Wetting Farms


Increase soil health, increase water infiltration, increase yield and increase profitability.

  • ✔️ Do you have issues with Non-Wetting Sands?
  • ✔️ Need to work in lime or both?
  • ✔️ Are you developing new country?
  • ✔️ Getting country ready for new layouts or need to
  • ✔️ renovate rough pasture country?

Tiny 390XL has all the features of the Tiny 390 with the added weight and strength of the XL frame which is fitted to both the 390XL and the 460XL. The frame is longer, hydraulics upgraded, transport height is greater and the 250 x 150 x 16mm RHS frame is laminated between a 12mm thick top plate and a 20mm bottom plate.

Designed and Manufactured in Australia for Australian conditions the 390XL features 36″ scalloped discs giving a 345mm clearance and a consistent working depth of approx 250mm. Consistent mixing of soil and busting open of hard pans is easy with this piece of equipment. If you require extra depth then have a look at Tiny XL460.

Increased choice of gang angles offers from 10 degrees through to 30 degrees allowing 390XL to be set up for many varied conditions. 3.5m transport width and available in 24 plate to 44 plate models in working widths from 4.8m to 8.5m.

Twist Out Bearing

Maximum reliability, minimum downtime and ease of maintenance. Grizzly’s twist in/out bearings and bearing housings with 6 bolt disc assembly. 2 year warranty on bearings. Never pull discs apart to change a bearing again.

Patented ‘T’ Bar Scraper

Grizzly Floppy “T” Bar Scraper system has proven over time to control soil and trash build up on axle spools. They allow you to continue working in all conditions. Get into a wet paddock earlier.

Hydraulic Pitch Control

Enables the set up of the machine to be fine tuned from the tractor seat. Helping to ensure a level finish. Springs give inbuilt solid impact protection and ground following ability.

Various Wheel Options

You can choose from a range of tyre types and sizes to suit your application. 28ply aero tyres shown.

Impact safety

Accumulators on the hydraulic pitch control allow the machine to follow contours and help absorb impacts from underground obstacles without putting excessive stress on frame and components.

Articulated Tongue

Heavy duty fully articulated tongue gives a close tolerance connection with the tractor minimising wear and allowing for smoother operation.

Tool Box & Tool Kit

To ensure all the tools you need to perform maintenance activities on your machine are always close at hand.

Heavy Duty Componentry

Bolt on / Bolt off stub axles and wheel legs allows for serviceability in the field if required. Lockable and greasable hydraulic ram pins with hardened bushes ensure years of trouble free service.

Narrow Transport

Fold to 3.5 metres (11’5”) for transport or narrow gateways. Goes easily from working position to transport position.

Hydraulic Level Lift

Hydraulic level lift ensures the machine lifts out and enters the ground evenly, adding to operator ease, comfort and the performance of the machine.

Hydraulic Safety

Counter balance valves for added safety in case of a burst hose as well as relief valve to ensure no undue stress is placed on componentry.

Road Transport Options

Oversize sign, tow hitch, tail lights and spare tyre for operators doing road travel or if working in conditions that increase the chances of getting a flat.

Australian Made

Family owned and operated as well as Australian Designed and built for Aussie farmers and Aussie conditions.




Rear Seeder Platform

Seeder platform allows mounting of rear small seeds seeder to over sow grasses when doing pasture renovation work.

Heavy Duty Rollers

A view from above shows the heavy duty double rollers. There are two on each gang that run on a stainless steel track. Easily moved from transport to working position plus easy to change gang settings.

28” to 42” Discs

Choose the right machine for the job and get the disc size that will work for you in your conditions.

Hydraulic Hose Protection

For conditions where a lot of timber and other organic matter will be encountered. Protects hydraulic hoses on the pull up to the top of the frame.

Hydraulic Fold

Go from working position to folding position without leaving the cab. The ultimate game changer for operator ease and comfort.

Tiny XL390 Specifications

Disc Size36″ x 1/2″ (910mm x 12.7mm) Scalloped Discs
Draught kW (hp) Requirements approx.186+ (250+)208+ (280+)231+ (310+)253+ (340+)275+ (370+)298+ (400+)
Working Width4.81m 15’9″5.55m 18’2″6.29m 20’7″7.03m 23′7.77m 25’6″8.5m 27’10”
Hectares P/H @ 8 kph3.854.445.035.626.216.8
Disc Spacing390mm (15″)
Weight kg approx16750kg17250kg17750kg18250kg18750kg19250kg
Weight per disc698kg616kg555kg507kg469kg438kg
No. of Bearings162424243232
Transport Width3.5mmm (11’5″)
Tyre & Axle SizeDual 500/50 – 22.5 16ply 8stud H90 100mm axle – options available
Main Frame Size250 x 150 x 16.00mm RHS enclosesd in a 25mm bottom plate and a 12mm top plate
Gang Frame Size250 x 150 x 16.0mm RHS
Gang Bearings50.8mm x 125mm Self Aligning Greaseable 2 Years Warranty with Reinforced spools

Download the Brochure


  • Product Overview
  • Specifications
  • Request Pricing Guide

Similar Equipment

Field Boss Folding Wing

Tiny 290

Field Boss Fixed Frame

Field Master