This is a truly versatile cultivation tool. The TINY230H runs 230mm (9”) disc spacings, this allows it to be used for all general cultivation requirements plus it can be put to work in tough conditions where soil is hard to penetrate but you still need a full cut-out or when you are getting country into shape.

Increased choice of gang angles gives you from 10 degrees through to 30 degrees allowing for fast, light stubble cultivation through to heavy, deep, slow cultivation. 3.5m transport width (3.8m on TNH60 – TNH76 when fitted with 32” discs) with your option of hydraulic or manual fold.

Other options include:

• ✔️ Hydraulic Fold Crumble Roller
• ✔️ 32” discs (10mm and 8mm thick)
• ✔️ Hydraulic Fold
• ✔️ Gang Bearing Shields
• ✔️ Road Transport Kit with O/S Sign and Tail Lights
• ✔️ Road or solid tyres
• ✔️ Rear Tow Hitch
• ✔️ Spring Loaded Bolt On Filler Discs
• ✔️ Spare Tyre Fitted to Machine

The heavy cultivation part is what people expect when the see the Tiny 230H but its how it can perform in the various gang angle settings that customers are most impressed with which has allowed Tiny 230H to to give farmers the versatility they have been looking for for so long.

Whether you’re a dryland farmer just wanting to lightly work in a stubble or you are a cattle producer wanting to do some pasture renovation or an irrigation farmer needing to work in your last years residue, it has the ability to do all these jobs plus more.

All models feature the 250 x 150 x 16mm RHS outside frame beams and gangs. With 280kgs to 180kgs of weight per disc. Available in 36 plate to 76 plate machines in working widths from 4.2m to 8.55m.

Twist Out Bearing

Maximum reliability, minimum downtime and ease of maintenance. Grizzly’s twist in/out bearings and bearing housings with 6 bolt disc assembly. 2 year warranty on bearings. Never pull discs apart to change a bearing again.

Patented ‘T’ Bar Scraper

Grizzly Floppy “T” Bar Scraper system has proven over time to control soil and trash build up on axle spools. They allow you to continue working in all conditions. Get into a wet paddock earlier.

Hydraulic Pitch Control

Enables the set up of the machine to be fine tuned from the tractor seat. Helping to ensure a level finish. Springs give inbuilt solid impact protection and ground following ability.

Various Wheel Options

You can choose from a range of tyre types and sizes to suit your application. Floatation, super singles or non pneumatic solid cushion (speak to your Grizzly representative to confirm best for your application)

Impact safety

Springs or Accumulators on the hydraulic pitch control allow the machine to follow through contours and help absorb impacts from underground obstacles without putting excessive stress on frame and components.

Articulated Tongue

Heavy duty fully articulated hardened steel tongue gives a close tolerance connection with the tractor minimising wear and allowing for smoother operation.

Tool Box & Tool Kit

To ensure all the tools you need to perform maintenance activities on your machine are always close at hand.

Heavy Duty Componentry

Bolt on / Bolt off stub axles and wheel legs allows for serviceability in the field if required. Lockable and greasable hydraulic ram pins with hardened bushes ensure years of trouble free service.

Narrow Transport

Most models fold to 3.5 metres (11’5”) width (3.8m (12’5”)on TNH60 – TNH76 when fitted with 32” discs) for transport or narrow gateways. Goes easily from working position to transport position. Also with hydraulic fold option.

Hydraulic Level Lift

Hydraulic level lift ensures the machine lifts out and enters the ground evenly, adding to operator ease, comfort and the performance of the machine. (not fitted when rear crumble roller fitted)

Hydraulic Safety

Counter balance valves for added safety in case of a burst hose as well as relief valve to ensure no undue stress is placed on componentry.

Road Transport Options

Oversize sign, tow hitch, tail lights and spare tyre for operators doing road travel or if working in conditions that increase the chances of getting a flat.

Australian Made

Heavy Duty Gang fold / Adjust Rollers

There are two on each gang that run on a stainless steel track. Easily moved from transport to working position plus easy to change gang settings.

28” to 32” Discs

Choose the right machine for the job and get the disc size that will work for you in your conditions.

Hydraulic Fold

Go from working position to folding position without leaving the cab. Speed up your operation with hydraulic fold.